dmesg - 2012-01-19 21:52
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-14-generic (buildd@allspice) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 (Ubuntu 3.0.0-14.23-generic 3.0.9)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000008f08d000 (usable)
[ 0.000000] BIOS-e820: 000000008f08d000 - 000000008f58d000 (reserved)
[ 0.000000] BIOS-e820: 000000008f58d000 - 000000008fbcf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000008fbcf000 - 000000008fbff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000008fbff000 - 000000008fc00000 (usable)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000024f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 4535s/168B, BIOS 68CPC Ver. F.02 06/09/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x24f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFF0000000 write-back
[ 0.000000] 2 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 3 base 00FFE10000 mask FFFFFF0000 write-protect
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000024f000000 aka 9456M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000008fc00000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 008fc00000 page 2M
[ 0.000000] kernel direct mapping tables up to 8fc00000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000024f000000
[ 0.000000] 0100000000 - 0240000000 page 1G
[ 0.000000] 0240000000 - 024f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 24f000000 @ 8f08b000-8f08d000
[ 0.000000] RAMDISK: 365b2000 - 372d1000
[ 0.000000] ACPI: RSDP 00000000000f2f00 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 000000008fbfe038 00048 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 000000008fbfd000 00074 (v01 HPQOEM 168B 00000003 HP 00000001)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 000000008fbd7000 22242 (v01 HPQOEM 168B 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 000000008fb8f000 00040
[ 0.000000] ACPI: APIC 000000008fbfc000 00084 (v01 HPQOEM 168B 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 000000008fbfb000 0003C (v01 HPQOEM 168B 00000001 HP 00000001)
[ 0.000000] ACPI: SLIC 000000008fbfa000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 000000008fbd4000 00038 (v01 HPQOEM 168B 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 000000008fbd3000 00E34 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000008fbd1000 0190A (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: SSDT 000000008fbd0000 0078F (v01 HP AMDSGTBL 00000001 INTL 20060912)
[ 0.000000] ACPI: SSDT 000000008fbcf000 0032F (v01 HP HPZPODDT 00000001 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000024f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000024f000000
[ 0.000000] NODE_DATA [000000024effb000 - 000000024effffff]
[ 0.000000] [ffffea0000000000-ffffea00081fffff] PMD -> [ffff880246e00000-ffff88024d7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0024f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0008f08d
[ 0.000000] 0: 0x0008fbff -> 0x0008fc00
[ 0.000000] 0: 0x00100000 -> 0x0024f000
[ 0.000000] On node 0 totalpages: 1957916
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 567494 pages, LIFO batch:31
[ 0.000000] Normal zone: 18760 pages used for memmap
[ 0.000000] Normal zone: 1353400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000008f08d000 - 000000008f58d000
[ 0.000000] PM: Registered nosave memory: 000000008f58d000 - 000000008fbcf000
[ 0.000000] PM: Registered nosave memory: 000000008fbcf000 - 000000008fbff000
[ 0.000000] PM: Registered nosave memory: 000000008fc00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 8fc00000 (gap: 8fc00000:50400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88024ec00000 s79616 r8192 d22784 u524288
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1924815
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7629636k/9682944k available (6109k kernel code, 1851280k absent, 202028k reserved, 4876k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 62914560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1397.353 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.70 BogoMIPS (lpj=5589412)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004047] Security Framework initialized
[ 0.004067] AppArmor: AppArmor initialized
[ 0.004070] Yama: becoming mindful.
[ 0.005302] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010445] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011831] Mount-cache hash table entries: 256
[ 0.012020] Initializing cgroup subsys cpuacct
[ 0.012028] Initializing cgroup subsys memory
[ 0.012039] Initializing cgroup subsys devices
[ 0.012043] Initializing cgroup subsys freezer
[ 0.012046] Initializing cgroup subsys net_cls
[ 0.012049] Initializing cgroup subsys blkio
[ 0.012057] Initializing cgroup subsys perf_event
[ 0.012094] tseg: 008fc00000
[ 0.012097] CPU: Physical Processor ID: 0
[ 0.012100] CPU: Processor Core ID: 0
[ 0.012103] mce: CPU supports 6 MCE banks
[ 0.015277] ACPI: Core revision 20110413
[ 0.028028] ftrace: allocating 25647 entries in 101 pages
[ 0.032503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073166] CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics stepping 00
[ 0.076004] Performance Events: AMD PMU driver.
[ 0.076004] ... version: 0
[ 0.076004] ... bit width: 48
[ 0.076004] ... generic registers: 4
[ 0.076004] ... value mask: 0000ffffffffffff
[ 0.076004] ... max period: 00007fffffffffff
[ 0.076004] ... fixed-purpose events: 0
[ 0.076004] ... event mask: 000000000000000f
[ 0.076004] Booting Node 0, Processors #1
[ 0.076004] smpboot cpu 1: start_ip = 99000
[ 0.164104] #2
[ 0.164107] smpboot cpu 2: start_ip = 99000
[ 0.256104] #3 Ok.
[ 0.256106] smpboot cpu 3: start_ip = 99000
[ 0.348029] Brought up 4 CPUs
[ 0.348033] Total of 4 processors activated (11179.47 BogoMIPS).
[ 0.349114] devtmpfs: initialized
[ 0.349114] PM: Registering ACPI NVS region at 8f58d000 (6561792 bytes)
[ 0.352168] print_constraints: dummy:
[ 0.352240] Time: 21:40:41 Date: 01/19/12
[ 0.352291] NET: Registered protocol family 16
[ 0.352567] Extended Config Space enabled on 0 nodes
[ 0.352608] ACPI: bus type pci registered
[ 0.352305] Trying to unpack rootfs image as initramfs...
[ 0.352762] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.352767] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.394746] PCI: Using configuration type 1 for base access
[ 0.394795] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.394797] mtrr: probably your BIOS does not setup all CPUs.
[ 0.394800] mtrr: corrected configuration.
[ 0.396074] bio: create slab at 0
[ 0.398520] ACPI: EC: Look up EC in DSDT
[ 0.699402] Freeing initrd memory: 13436k freed
[ 0.788230] ACPI: Interpreter enabled
[ 0.788236] ACPI: (supports S0 S3 S4 S5)
[ 0.788261] ACPI: Using IOAPIC for interrupt routing
[ 0.791220] ACPI: Power Resource [APPR] (off)
[ 0.795074] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[ 0.795267] ACPI: No dock devices found.
[ 0.795269] HEST: Table not found.
[ 0.795272] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.795479] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.795629] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.795632] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.795635] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.795637] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.795639] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.795641] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.795643] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.795645] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.795648] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.795650] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.795652] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.795654] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.795656] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.795658] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.795661] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.795663] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.795665] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xdfffffff]
[ 0.795667] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfffdffff]
[ 0.795674] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cf1ff]
[ 0.795677] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000d3fff] conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff]
[ 0.795689] pci 0000:00:00.0: [1022:1705] type 0 class 0x000600
[ 0.795726] pci 0000:00:01.0: [1002:9647] type 0 class 0x000300
[ 0.795736] pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
[ 0.795743] pci 0000:00:01.0: reg 14: [io 0x7000-0x70ff]
[ 0.795749] pci 0000:00:01.0: reg 18: [mem 0xd8100000-0xd813ffff]
[ 0.795783] pci 0000:00:01.0: supports D1 D2
[ 0.795800] pci 0000:00:01.1: [1002:1714] type 0 class 0x000403
[ 0.795808] pci 0000:00:01.1: reg 10: [mem 0xd8144000-0xd8147fff]
[ 0.795851] pci 0000:00:01.1: supports D1 D2
[ 0.795919] pci 0000:00:03.0: [1022:1708] type 1 class 0x000604
[ 0.795962] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.795966] pci 0000:00:03.0: PME# disabled
[ 0.795985] pci 0000:00:04.0: [1022:1709] type 1 class 0x000604
[ 0.796086] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.796089] pci 0000:00:04.0: PME# disabled
[ 0.796109] pci 0000:00:05.0: [1022:170a] type 1 class 0x000604
[ 0.796153] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.796156] pci 0000:00:05.0: PME# disabled
[ 0.796223] pci 0000:00:07.0: [1022:170c] type 1 class 0x000604
[ 0.796267] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.796270] pci 0000:00:07.0: PME# disabled
[ 0.796359] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
[ 0.796381] pci 0000:00:10.0: reg 10: [mem 0xd8148000-0xd8149fff 64bit]
[ 0.796472] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.796477] pci 0000:00:10.0: PME# disabled
[ 0.796525] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
[ 0.796552] pci 0000:00:10.1: reg 10: [mem 0xd814a000-0xd814bfff 64bit]
[ 0.796664] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.796669] pci 0000:00:10.1: PME# disabled
[ 0.796714] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[ 0.796734] pci 0000:00:11.0: reg 10: [io 0x7118-0x711f]
[ 0.796745] pci 0000:00:11.0: reg 14: [io 0x7124-0x7127]
[ 0.796756] pci 0000:00:11.0: reg 18: [io 0x7110-0x7117]
[ 0.796766] pci 0000:00:11.0: reg 1c: [io 0x7120-0x7123]
[ 0.796777] pci 0000:00:11.0: reg 20: [io 0x7100-0x710f]
[ 0.796787] pci 0000:00:11.0: reg 24: [mem 0xd8151000-0xd81517ff]
[ 0.796838] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 0.796853] pci 0000:00:12.0: reg 10: [mem 0xd8150000-0xd8150fff]
[ 0.796929] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 0.796950] pci 0000:00:12.2: reg 10: [mem 0xd814f000-0xd814f0ff]
[ 0.797027] pci 0000:00:12.2: supports D1 D2
[ 0.797029] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.797033] pci 0000:00:12.2: PME# disabled
[ 0.797056] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 0.797071] pci 0000:00:13.0: reg 10: [mem 0xd814e000-0xd814efff]
[ 0.797147] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 0.797168] pci 0000:00:13.2: reg 10: [mem 0xd814d000-0xd814d0ff]
[ 0.797245] pci 0000:00:13.2: supports D1 D2
[ 0.797247] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.797251] pci 0000:00:13.2: PME# disabled
[ 0.797273] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 0.797357] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 0.797380] pci 0000:00:14.2: reg 10: [mem 0xd8140000-0xd8143fff 64bit]
[ 0.797444] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.797448] pci 0000:00:14.2: PME# disabled
[ 0.797463] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 0.797545] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 0.797592] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
[ 0.797607] pci 0000:00:14.5: reg 10: [mem 0xd814c000-0xd814cfff]
[ 0.797684] pci 0000:00:15.0: [1022:43a0] type 1 class 0x000604
[ 0.797754] pci 0000:00:15.0: supports D1 D2
[ 0.797788] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.797820] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.797849] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.797879] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.797916] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.797945] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.797974] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.798003] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.798132] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300
[ 0.798150] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.798164] pci 0000:01:00.0: reg 18: [mem 0xd8000000-0xd801ffff 64bit]
[ 0.798174] pci 0000:01:00.0: reg 20: [io 0x6000-0x60ff]
[ 0.798192] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.798216] pci 0000:01:00.0: supports D1 D2
[ 0.804108] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.804124] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff]
[ 0.804133] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.804147] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.804220] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.804237] pci 0000:02:00.0: reg 10: [io 0x5000-0x50ff]
[ 0.804263] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.804279] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.804327] pci 0000:02:00.0: supports D1 D2
[ 0.804329] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.804334] pci 0000:02:00.0: PME# disabled
[ 0.812109] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.812125] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.812134] pci 0000:00:04.0: bridge window [mem 0xd7000000-0xd7ffffff]
[ 0.812147] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.812220] pci 0000:03:00.0: [197b:2392] type 0 class 0x000880
[ 0.812239] pci 0000:03:00.0: reg 10: [mem 0xd6003000-0xd60030ff]
[ 0.812306] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.812374] pci 0000:03:00.2: [197b:2391] type 0 class 0x000805
[ 0.812392] pci 0000:03:00.2: reg 10: [mem 0xd6002000-0xd60020ff]
[ 0.812524] pci 0000:03:00.3: [197b:2393] type 0 class 0x000880
[ 0.812542] pci 0000:03:00.3: reg 10: [mem 0xd6001000-0xd60010ff]
[ 0.820126] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.820142] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 0.820152] pci 0000:00:05.0: bridge window [mem 0xd6000000-0xd6ffffff]
[ 0.820159] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.820231] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280
[ 0.820254] pci 0000:04:00.0: reg 10: [mem 0xd5000000-0xd500ffff 64bit]
[ 0.820333] pci 0000:04:00.0: supports D1
[ 0.820335] pci 0000:04:00.0: PME# supported from D0 D1 D3hot
[ 0.820340] pci 0000:04:00.0: PME# disabled
[ 0.828108] pci 0000:00:07.0: PCI bridge to [bus 04-06]
[ 0.828125] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff]
[ 0.828134] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 0.828145] pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.828273] pci 0000:00:14.4: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.828278] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.828283] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.828288] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.828291] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.828293] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.828296] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.828298] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.828300] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.828303] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.828305] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.828307] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.828310] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.828312] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.828314] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.828317] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.828319] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.828321] pci 0000:00:14.4: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.828324] pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode)
[ 0.828326] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfffdffff] (subtractive decode)
[ 0.828435] pci 0000:00:15.0: PCI bridge to [bus 08-08]
[ 0.828442] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.828446] pci 0000:00:15.0: bridge window [mem 0xd4000000-0xd4ffffff]
[ 0.828453] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.828485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.828741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GFX0._PRT]
[ 0.828779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.828822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.828858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.828906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 0.828977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
[ 0.829145] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.829376] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.829378] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.834875] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.834938] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835001] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835063] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835148] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835185] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835221] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[ 0.835314] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.835327] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.835330] vgaarb: loaded
[ 0.835331] vgaarb: bridge control possible 0000:01:00.0
[ 0.835333] vgaarb: bridge control possible 0000:00:01.0
[ 0.835490] SCSI subsystem initialized
[ 0.835508] libata version 3.00 loaded.
[ 0.835508] usbcore: registered new interface driver usbfs
[ 0.835508] usbcore: registered new interface driver hub
[ 0.836103] usbcore: registered new device driver usb
[ 0.836166] PCI: Using ACPI for IRQ routing
[ 0.845936] PCI: pci_cache_line_size set to 64 bytes
[ 0.846065] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.846067] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.846070] reserve RAM buffer: 000000008f08d000 - 000000008fffffff
[ 0.846072] reserve RAM buffer: 000000008fc00000 - 000000008fffffff
[ 0.846074] reserve RAM buffer: 000000024f000000 - 000000024fffffff
[ 0.846166] NetLabel: Initializing
[ 0.846167] NetLabel: domain hash size = 128
[ 0.846169] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.846179] NetLabel: unlabeled traffic allowed by default
[ 0.846275] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.846279] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.848066] Switching to clocksource hpet
[ 0.851783] Switched to NOHz mode on CPU #0
[ 0.851945] Switched to NOHz mode on CPU #3
[ 0.851954] Switched to NOHz mode on CPU #2
[ 0.851979] Switched to NOHz mode on CPU #1
[ 0.853206] AppArmor: AppArmor Filesystem Enabled
[ 0.853237] pnp: PnP ACPI init
[ 0.853252] ACPI: bus type pnp registered
[ 0.853380] pnp 00:00: [bus 00-ff]
[ 0.853383] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.853385] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.853388] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.853390] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.853392] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.853394] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.853395] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.853397] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.853399] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.853401] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.853403] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.853405] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.853407] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.853409] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.853411] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.853413] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.853415] pnp 00:00: [mem 0xb0000000-0xdfffffff window]
[ 0.853417] pnp 00:00: [mem 0xf0000000-0xfffdffff window]
[ 0.853419] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.853486] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.853500] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.853502] pnp 00:01: [mem 0xfeb00000-0xfeb00fff]
[ 0.853504] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.853508] pnp 00:01: [mem 0xfec10000-0xfec10fff]
[ 0.853510] pnp 00:01: [mem 0xfed61000-0xfed61fff]
[ 0.853512] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[ 0.853513] pnp 00:01: [mem 0xfed81000-0xfed81fff]
[ 0.853515] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[ 0.853572] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.853575] system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 0.853578] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.853580] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.853583] system 00:01: [mem 0xfed61000-0xfed61fff] has been reserved
[ 0.853586] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.853588] system 00:01: [mem 0xfed81000-0xfed81fff] has been reserved
[ 0.853591] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.853594] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.853741] pnp 00:02: [io 0x0000-0x000f]
[ 0.853743] pnp 00:02: [io 0x0081-0x008f]
[ 0.853745] pnp 00:02: [io 0x00c0-0x00df]
[ 0.853748] pnp 00:02: [dma 4]
[ 0.853775] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.853783] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.853840] pnp 00:03: [irq 13]
[ 0.853867] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.853874] pnp 00:04: [io 0x0061]
[ 0.853903] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.853938] pnp 00:05: [io 0x0010-0x001f]
[ 0.853940] pnp 00:05: [io 0x002e-0x002f]
[ 0.853942] pnp 00:05: [io 0x004e-0x004f]
[ 0.853944] pnp 00:05: [io 0x0072-0x0073]
[ 0.853945] pnp 00:05: [io 0x0080]
[ 0.853947] pnp 00:05: [io 0x00b0-0x00b1]
[ 0.853949] pnp 00:05: [io 0x0092]
[ 0.853950] pnp 00:05: [io 0x0400-0x04cf]
[ 0.853952] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.853954] pnp 00:05: [io 0x04d6]
[ 0.853955] pnp 00:05: [io 0x0680-0x06ff]
[ 0.853957] pnp 00:05: [io 0x077a]
[ 0.853958] pnp 00:05: [io 0x0c00-0x0c01]
[ 0.853960] pnp 00:05: [io 0x0c14]
[ 0.853962] pnp 00:05: [io 0x0c50-0x0c52]
[ 0.853963] pnp 00:05: [io 0x0c6c]
[ 0.853965] pnp 00:05: [io 0x0c6f]
[ 0.853967] pnp 00:05: [io 0x0cd0-0x0cdb]
[ 0.853968] pnp 00:05: [io 0x0220-0x0227]
[ 0.853970] pnp 00:05: [io 0x0260-0x0273]
[ 0.853971] pnp 00:05: [io 0x0800]
[ 0.853973] pnp 00:05: [io 0x0804]
[ 0.853975] pnp 00:05: [io 0x087f]
[ 0.853976] pnp 00:05: [io 0x0cdc-0x0cdf]
[ 0.853978] pnp 00:05: [io 0x00b8]
[ 0.853979] pnp 00:05: [io 0x0022-0x0023]
[ 0.853981] pnp 00:05: [io 0x0b00-0x0b0f]
[ 0.853983] pnp 00:05: [io 0x0b20-0x0b3f]
[ 0.853984] pnp 00:05: [io 0x0200-0x027f]
[ 0.853986] pnp 00:05: [io 0x0840-0x0847]
[ 0.854051] system 00:05: [io 0x0400-0x04cf] has been reserved
[ 0.854053] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.854056] system 00:05: [io 0x04d6] has been reserved
[ 0.854058] system 00:05: [io 0x0680-0x06ff] has been reserved
[ 0.854060] system 00:05: [io 0x077a] has been reserved
[ 0.854062] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.854065] system 00:05: [io 0x0c14] has been reserved
[ 0.854067] system 00:05: [io 0x0c50-0x0c52] has been reserved
[ 0.854069] system 00:05: [io 0x0c6c] has been reserved
[ 0.854071] system 00:05: [io 0x0c6f] has been reserved
[ 0.854074] system 00:05: [io 0x0cd0-0x0cdb] has been reserved
[ 0.854076] system 00:05: [io 0x0220-0x0227] has been reserved
[ 0.854078] system 00:05: [io 0x0260-0x0273] has been reserved
[ 0.854081] system 00:05: [io 0x0800] has been reserved
[ 0.854083] system 00:05: [io 0x0804] has been reserved
[ 0.854085] system 00:05: [io 0x087f] has been reserved
[ 0.854087] system 00:05: [io 0x0cdc-0x0cdf] has been reserved
[ 0.854090] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.854092] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.854095] system 00:05: [io 0x0200-0x027f] could not be reserved
[ 0.854097] system 00:05: [io 0x0840-0x0847] has been reserved
[ 0.854100] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.854135] pnp 00:06: [mem 0x00000000-0x0009ffff]
[ 0.854137] pnp 00:06: [mem 0x00100000-0xafffffff]
[ 0.854139] pnp 00:06: [mem 0xffe00000-0xffffffff]
[ 0.854186] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.854189] system 00:06: [mem 0x00100000-0xafffffff] could not be reserved
[ 0.854191] system 00:06: [mem 0xffe00000-0xffffffff] could not be reserved
[ 0.854194] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.854272] pnp 00:07: [io 0x0070-0x0071]
[ 0.854277] pnp 00:07: [irq 8]
[ 0.854305] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.854413] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.854443] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.854467] pnp 00:09: [io 0x0060]
[ 0.854469] pnp 00:09: [io 0x0064]
[ 0.854520] pnp 00:09: [irq 1]
[ 0.854552] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.854562] pnp 00:0a: [irq 12]
[ 0.854593] pnp 00:0a: Plug and Play ACPI device, IDs SYN0189 SYN0100 SYN0002 PNP0f13 (active)
[ 0.854760] pnp 00:0b: [irq 23]
[ 0.854796] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.855005] pnp: PnP ACPI: found 12 devices
[ 0.855006] ACPI: ACPI bus type pnp unregistered
[ 0.861234] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.861238] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.861242] PCI: max bus depth: 1 pci_try_num: 2
[ 0.861328] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8020000-0xd803ffff pref]
[ 0.861332] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.861335] pci 0000:00:03.0: bridge window [io 0x6000-0x6fff]
[ 0.861339] pci 0000:00:03.0: bridge window [mem 0xd8000000-0xd80fffff]
[ 0.861342] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.861347] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.861350] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.861354] pci 0000:00:04.0: bridge window [mem 0xd7000000-0xd7ffffff]
[ 0.861358] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.861364] pci 0000:03:00.0: BAR 6: assigned [mem 0xd1000000-0xd100ffff pref]
[ 0.861366] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.861368] pci 0000:00:05.0: bridge window [io 0x4000-0x4fff]
[ 0.861372] pci 0000:00:05.0: bridge window [mem 0xd6000000-0xd6ffffff]
[ 0.861376] pci 0000:00:05.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.861381] pci 0000:00:07.0: PCI bridge to [bus 04-06]
[ 0.861383] pci 0000:00:07.0: bridge window [io 0x3000-0x3fff]
[ 0.861387] pci 0000:00:07.0: bridge window [mem 0xd5000000-0xd5ffffff]
[ 0.861391] pci 0000:00:07.0: bridge window [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.861396] pci 0000:00:14.4: PCI bridge to [bus 07-07]
[ 0.861398] pci 0000:00:14.4: bridge window [io disabled]
[ 0.861449] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.861454] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.861461] pci 0000:00:15.0: PCI bridge to [bus 08-08]
[ 0.861464] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
[ 0.861469] pci 0000:00:15.0: bridge window [mem 0xd4000000-0xd4ffffff]
[ 0.861474] pci 0000:00:15.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.861491] pci 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.861496] pci 0000:00:03.0: setting latency timer to 64
[ 0.861504] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.861508] pci 0000:00:04.0: setting latency timer to 64
[ 0.861516] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.861519] pci 0000:00:05.0: setting latency timer to 64
[ 0.861525] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.861528] pci 0000:00:07.0: setting latency timer to 64
[ 0.861539] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.861543] pci 0000:00:15.0: setting latency timer to 64
[ 0.861547] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.861549] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.861551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.861553] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.861555] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.861557] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.861559] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.861562] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.861564] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.861566] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.861568] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.861570] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.861572] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.861574] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.861576] pci_bus 0000:00: resource 18 [mem 0xb0000000-0xdfffffff]
[ 0.861578] pci_bus 0000:00: resource 19 [mem 0xf0000000-0xfffdffff]
[ 0.861581] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
[ 0.861583] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd80fffff]
[ 0.861585] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.861587] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.861589] pci_bus 0000:02: resource 1 [mem 0xd7000000-0xd7ffffff]
[ 0.861592] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 0.861594] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
[ 0.861596] pci_bus 0000:03: resource 1 [mem 0xd6000000-0xd6ffffff]
[ 0.861598] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 0.861600] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.861602] pci_bus 0000:04: resource 1 [mem 0xd5000000-0xd5ffffff]
[ 0.861605] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd2ffffff 64bit pref]
[ 0.861607] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.861609] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.861611] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.861613] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.861615] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.861618] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.861620] pci_bus 0000:07: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.861622] pci_bus 0000:07: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.861624] pci_bus 0000:07: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.861626] pci_bus 0000:07: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.861628] pci_bus 0000:07: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.861630] pci_bus 0000:07: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.861632] pci_bus 0000:07: resource 16 [mem 0x000ec000-0x000effff]
[ 0.861634] pci_bus 0000:07: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.861636] pci_bus 0000:07: resource 18 [mem 0xb0000000-0xdfffffff]
[ 0.861638] pci_bus 0000:07: resource 19 [mem 0xf0000000-0xfffdffff]
[ 0.861640] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff]
[ 0.861642] pci_bus 0000:08: resource 1 [mem 0xd4000000-0xd4ffffff]
[ 0.861645] pci_bus 0000:08: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.861680] NET: Registered protocol family 2
[ 0.861900] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.863142] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.865644] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.865942] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.865944] TCP reno registered
[ 0.865961] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.866023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.866164] NET: Registered protocol family 1
[ 0.866180] pci 0000:00:01.0: Boot video device
[ 0.871281] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.871331] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.871334] Placing 64MB software IO TLB between ffff88008b08b000 - ffff88008f08b000
[ 0.871336] software IO TLB at phys 0x8b08b000 - 0x8f08b000
[ 0.871916] audit: initializing netlink socket (disabled)
[ 0.871926] type=2000 audit(1327009241.864:1): initialized
[ 0.906941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.939206] VFS: Disk quotas dquot_6.5.2
[ 0.939262] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.940032] fuse init (API version 7.16)
[ 0.940130] msgmni has been set to 14927
[ 0.941249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.941368] io scheduler noop registered
[ 0.941373] io scheduler deadline registered
[ 0.941432] io scheduler cfq registered (default)
[ 0.941782] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.941803] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.941979] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.942070] ACPI: AC Adapter [AC] (on-line)
[ 0.942138] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.942146] ACPI: Sleep Button [SLPB]
[ 0.942323] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.942393] ACPI: Lid Switch [LID]
[ 0.942424] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.942427] ACPI: Power Button [PWRF]
[ 0.942497] ACPI: acpi_idle registered with cpuidle
[ 0.967914] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.967917] ACPI: Thermal Zone [CPUZ] (49 C)
[ 0.989530] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.989533] ACPI: Thermal Zone [GFXZ] (48 C)
[ 0.999422] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.999429] ACPI: Thermal Zone [EXTZ] (36 C)
[ 1.009325] thermal LNXTHERM:03: registered as thermal_zone3
[ 1.009332] ACPI: Thermal Zone [LOCZ] (43 C)
[ 1.019219] thermal LNXTHERM:04: registered as thermal_zone4
[ 1.019224] ACPI: Thermal Zone [BATZ] (23 C)
[ 1.019259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.019276] ERST: Table is not found!
[ 1.067991] ACPI: Battery Slot [BAT0] (battery present)
[ 1.164926] Linux agpgart interface v0.103
[ 1.165803] brd: module loaded
[ 1.166181] loop: module loaded
[ 1.166543] Fixed MDIO Bus: probed
[ 1.166561] PPP generic driver version 2.4.2
[ 1.166592] tun: Universal TUN/TAP device driver, 1.6
[ 1.166594] tun: (C) 1999-2004 Max Krasnyansky
[ 1.166659] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.166726] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.166836] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.166840] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.166867] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.166876] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.166902] QUIRK: Enable AMD PLL fix
[ 1.166914] ehci_hcd 0000:00:12.2: debug port 1
[ 1.166940] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd814f000
[ 1.176262] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.176436] hub 1-0:1.0: USB hub found
[ 1.176440] hub 1-0:1.0: 5 ports detected
[ 1.176610] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.176637] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.176640] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.176672] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.176680] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.176702] ehci_hcd 0000:00:13.2: debug port 1
[ 1.176718] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd814d000
[ 1.188262] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.188427] hub 2-0:1.0: USB hub found
[ 1.188431] hub 2-0:1.0: 5 ports detected
[ 1.188552] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.188629] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.188656] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.188661] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.188700] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.188773] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd8150000
[ 1.248387] hub 3-0:1.0: USB hub found
[ 1.248441] hub 3-0:1.0: 5 ports detected
[ 1.248519] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.248547] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.248551] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.248584] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.248602] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd814e000
[ 1.308388] hub 4-0:1.0: USB hub found
[ 1.308442] hub 4-0:1.0: 5 ports detected
[ 1.308526] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.308554] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.308558] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.308592] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
[ 1.308659] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd814c000
[ 1.368388] hub 5-0:1.0: USB hub found
[ 1.368442] hub 5-0:1.0: 2 ports detected
[ 1.368514] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.368579] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.370894] i8042: Detected active multiplexing controller, rev 1.1
[ 1.372104] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.372111] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.372140] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.372160] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.372176] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.372257] mousedev: PS/2 mouse device common for all mice
[ 1.372418] rtc_cmos 00:07: RTC can wake from S4
[ 1.372498] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.372521] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.372612] device-mapper: uevent: version 1.0.3
[ 1.372670] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.372787] cpuidle: using governor ladder
[ 1.372979] cpuidle: using governor menu
[ 1.372981] EFI Variables Facility v0.08 2004-May-17
[ 1.373181] TCP cubic registered
[ 1.373286] NET: Registered protocol family 10
[ 1.373712] NET: Registered protocol family 17
[ 1.373724] Registering the dns_resolver key type
[ 1.373804] PM: Hibernation image not present or could not be loaded.
[ 1.373814] registered taskstats version 1
[ 1.397453] Magic number: 12:756:702
[ 1.397593] rtc_cmos 00:07: setting system clock to 2012-01-19 21:40:42 UTC (1327009242)
[ 1.397631] powernow-k8: Found 1 AMD A6-3400M APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
[ 1.397658] powernow-k8: Core Performance Boosting: on.
[ 1.397713] powernow-k8: 0 : pstate 0 (1400 MHz)
[ 1.397714] powernow-k8: 1 : pstate 1 (1300 MHz)
[ 1.397716] powernow-k8: 2 : pstate 2 (1200 MHz)
[ 1.397717] powernow-k8: 3 : pstate 3 (1100 MHz)
[ 1.397719] powernow-k8: 4 : pstate 4 (1000 MHz)
[ 1.397721] powernow-k8: 5 : pstate 5 (900 MHz)
[ 1.397722] powernow-k8: 6 : pstate 6 (800 MHz)
[ 1.398368] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.398371] EDD information not available.
[ 1.400113] Freeing unused kernel memory: 984k freed
[ 1.400355] Write protecting the kernel read-only data: 10240k
[ 1.400689] Freeing unused kernel memory: 16k freed
[ 1.402191] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.405044] Freeing unused kernel memory: 1396k freed
[ 1.428396] udevd[87]: starting version 173
[ 1.467478] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.467536] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.467591] r8169 0000:02:00.0: setting latency timer to 64
[ 1.467689] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.468196] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc90000c3c000, 10:1f:74:e8:39:0a, XID 0c200000 IRQ 40
[ 1.469462] sdhci: Secure Digital Host Controller Interface driver
[ 1.469467] sdhci: Copyright(c) Pierre Ossman
[ 1.470002] sdhci-pci 0000:03:00.0: SDHCI controller found [197b:2392] (rev 30)
[ 1.470070] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.470119] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 1.470133] mmc0: no vmmc regulator found
[ 1.470162] Registered led device: mmc0::
[ 1.470233] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 1.470242] sdhci-pci 0000:03:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 1.470253] sdhci-pci 0000:03:00.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.470259] sdhci-pci 0000:03:00.2: Refusing to bind to secondary interface.
[ 1.470265] sdhci-pci 0000:03:00.2: PCI INT A disabled
[ 1.482558] xhci_hcd 0000:00:10.0: enabling device (0000 -> 0002)
[ 1.482571] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.482607] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 1.482612] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.482710] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.482967] xhci_hcd 0000:00:10.0: irq 18, io mem 0xd8148000
[ 1.483029] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
[ 1.483033] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
[ 1.483038] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.483042] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.483046] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.483195] xHCI xhci_add_endpoint called for root hub
[ 1.483197] xHCI xhci_check_bandwidth called for root hub
[ 1.483239] hub 6-0:1.0: USB hub found
[ 1.483248] hub 6-0:1.0: 2 ports detected
[ 1.483356] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.483400] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
[ 1.488119] xHCI xhci_add_endpoint called for root hub
[ 1.488123] xHCI xhci_check_bandwidth called for root hub
[ 1.488162] hub 7-0:1.0: USB hub found
[ 1.488227] hub 7-0:1.0: 2 ports detected
[ 1.488326] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.488361] xhci_hcd 0000:00:10.1: setting latency timer to 64
[ 1.488366] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.488418] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.488621] xhci_hcd 0000:00:10.1: irq 17, io mem 0xd814a000
[ 1.490226] xhci_hcd 0000:00:10.1: irq 46 for MSI/MSI-X
[ 1.490240] xhci_hcd 0000:00:10.1: irq 47 for MSI/MSI-X
[ 1.490247] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 1.490254] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.490260] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.490504] xHCI xhci_add_endpoint called for root hub
[ 1.490507] xHCI xhci_check_bandwidth called for root hub
[ 1.490549] hub 8-0:1.0: USB hub found
[ 1.490604] hub 8-0:1.0: 2 ports detected
[ 1.490688] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.490773] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
[ 1.492150] xHCI xhci_add_endpoint called for root hub
[ 1.492153] xHCI xhci_check_bandwidth called for root hub
[ 1.492184] hub 9-0:1.0: USB hub found
[ 1.492229] hub 9-0:1.0: 2 ports detected
[ 1.492719] ahci 0000:00:11.0: version 3.0
[ 1.492796] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.492865] ahci 0000:00:11.0: irq 51 for MSI/MSI-X
[ 1.492936] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.492942] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.492950] ahci 0000:00:11.0: setting latency timer to 64
[ 1.494784] scsi0 : ahci
[ 1.495014] scsi1 : ahci
[ 1.495374] ata1: SATA max UDMA/133 abar m2048@0xd8151000 port 0xd8151100 irq 51
[ 1.495379] ata2: SATA max UDMA/133 abar m2048@0xd8151000 port 0xd8151180 irq 51
[ 1.500076] usb 1-5: new high speed USB device number 2 using ehci_hcd
[ 1.868263] Refined TSC clocksource calibration: 1397.458 MHz.
[ 1.868272] Switching to clocksource tsc
[ 1.988284] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.988319] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.992268] ata2.00: ATAPI: hp DVDRAM GT31L, MR52, max UDMA/100
[ 1.996259] ata2.00: configured for UDMA/100
[ 2.000340] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 2.000344] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.010485] ata1.00: configured for UDMA/133
[ 2.011020] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
[ 2.011207] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.011492] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.012242] sd 0:0:0:0: [sda] Write Protect is off
[ 2.012248] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.012432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.013778] sda: sda1 sda2 < sda5 >
[ 2.014002] scsi 1:0:0:0: CD-ROM hp DVDRAM GT31L MR52 PQ: 0 ANSI: 5
[ 2.014570] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.018069] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.018078] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.018240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.018316] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.071546] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.116298] usb 4-1: new low speed USB device number 2 using ohci_hcd
[ 2.325554] udevd[336]: starting version 173
[ 2.548263] usb 4-5: new full speed USB device number 3 using ohci_hcd
[ 5.079905] Adding 7829500k swap on /dev/sda5. Priority:-1 extents:1 across:7829500k SS
[ 5.082794] lp: driver loaded but no devices found
[ 5.112231] cfg80211: Calling CRDA to update world regulatory domain
[ 5.123827] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.123832] Disabling lock debugging due to kernel taint
[ 5.128453] jmb38x_ms 0000:03:00.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.128464] jmb38x_ms 0000:03:00.3: setting latency timer to 64
[ 5.137491] ath9k 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.137504] ath9k 0000:04:00.0: setting latency timer to 64
[ 5.187484] ath: EEPROM regdomain: 0x60
[ 5.187487] ath: EEPROM indicates we should expect a direct regpair map
[ 5.187492] ath: Country alpha2 being used: 00
[ 5.187494] ath: Regpair used: 0x60
[ 5.187499] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187506] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187510] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187513] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187517] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187520] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187523] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187526] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187530] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187533] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187537] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187540] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187543] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187546] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187550] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187553] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187557] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187560] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187563] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187566] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187570] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187573] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187577] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187580] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187584] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.187587] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 5.187590] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 5.189353] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5.191287] type=1400 audit(1327009246.289:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=480 comm="apparmor_parser"
[ 5.191991] type=1400 audit(1327009246.289:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=480 comm="apparmor_parser"
[ 5.192427] type=1400 audit(1327009246.293:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=480 comm="apparmor_parser"
[ 5.210825] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.211510] Registered led device: ath9k-phy0
[ 5.211522] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90011e00000, irq=19
[ 5.222351] wmi: Mapper loaded
[ 5.244939] acpi device:01: registered as cooling_device4
[ 5.245685] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 5.245764] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.245801] hp_accel: laptop model unknown, using default axes configuration
[ 5.246488] lis3lv02d: 8 bits 3DC sensor found
[ 5.253604] acpi device:0b: registered as cooling_device5
[ 5.254645] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5
[ 5.254698] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 5.261560] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.286434] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 5.286762] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.290652] Registered led device: hp::hddprotect
[ 5.290687] hp_accel: driver loaded
[ 5.312455] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.312530] HDA Intel 0000:00:01.1: irq 52 for MSI/MSI-X
[ 5.312563] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 5.340886] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.341033] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
[ 5.358399] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 5.358413] HDA Intel 0000:00:14.2: power state changed by ACPI to D0
[ 5.358425] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.421973] [fglrx] Maximum main memory to use for locked dma buffers: 7242 MBytes.
[ 5.422018] [fglrx] vendor: 1002 device: 9647 count: 1
[ 5.426133] [fglrx] vendor: 1002 device: 6760 count: 2
[ 5.426489] [fglrx] ioport: bar 1, base 0x7000, size: 0x100
[ 5.426509] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.426517] pci 0000:00:01.0: setting latency timer to 64
[ 5.427224] [fglrx] ioport: bar 4, base 0x6000, size: 0x100
[ 5.427235] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 5.427242] pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.427249] pci 0000:01:00.0: setting latency timer to 64
[ 5.427566] [fglrx] Kernel PAT support is enabled
[ 5.427608] [fglrx] module loaded - fglrx 8.92.6 [Nov 9 2011] with 2 minors
[ 5.432463] input: HD-Audio Generic Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 5.432647] input: HD-Audio Generic HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 5.472232] init: failsafe main process (740) killed by TERM signal
[ 5.515296] Bluetooth: Core ver 2.16
[ 5.515337] NET: Registered protocol family 31
[ 5.515339] Bluetooth: HCI device and connection manager initialized
[ 5.515344] Bluetooth: HCI socket layer initialized
[ 5.515346] Bluetooth: L2CAP socket layer initialized
[ 5.530962] type=1400 audit(1327009246.629:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=846 comm="apparmor_parser"
[ 5.531736] type=1400 audit(1327009246.629:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=846 comm="apparmor_parser"
[ 5.534152] type=1400 audit(1327009246.633:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=854 comm="apparmor_parser"
[ 5.538081] type=1400 audit(1327009246.637:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser"
[ 5.538263] type=1400 audit(1327009246.637:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=854 comm="apparmor_parser"
[ 5.540338] type=1400 audit(1327009246.641:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=846 comm="apparmor_parser"
[ 5.566494] Bluetooth: SCO socket layer initialized
[ 5.579011] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5.579017] cfg80211: World regulatory domain updated:
[ 5.579020] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.579025] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.579029] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.579033] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5.579036] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.579040] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.580795] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.607472] usbcore: registered new interface driver btusb
[ 5.630877] Linux video capture interface: v2.00
[ 5.631711] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (0461:4dc7)
[ 5.648801] input: PixArt HP Mobile USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input10
[ 5.649218] generic-usb 0003:03F0:8607.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP Mobile USB Optical Mouse] on usb-0000:00:13.0-1/input0
[ 5.649784] usbcore: registered new interface driver usbhid
[ 5.649788] usbhid: USB HID core driver
[ 5.686147] init: apport pre-start process (939) terminated with status 1
[ 5.701128] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 5.709931] init: apport post-stop process (978) terminated with status 1
[ 5.858769] Bluetooth: RFCOMM TTY layer initialized
[ 5.858778] Bluetooth: RFCOMM socket layer initialized
[ 5.858781] Bluetooth: RFCOMM ver 1.11
[ 5.861779] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.861784] Bluetooth: BNEP filters: protocol multicast
[ 5.880059] input: HP HD Webcam [Fixed] as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input12
[ 5.880145] usbcore: registered new interface driver uvcvideo
[ 5.880149] USB Video Class driver (v1.1.0)
[ 5.899508] r8169 0000:02:00.0: eth0: link down
[ 5.901153] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.945332] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.084033] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 6.192381] hp_wmi: Unknown event_id - 0 - 0x0
[ 6.272606] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400
[ 6.319524] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 6.582535] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 6.582538] vesafb: scrolling: redraw
[ 6.582542] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 6.583752] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90012a80000, using 4160k, total 4160k
[ 6.584049] Console: switching to colour frame buffer device 170x48
[ 6.584072] fb0: VESA VGA frame buffer device
[ 6.589042] ppdev: user-space parallel port driver
[ 6.599158] audit_printk_skb: 18 callbacks suppressed
[ 6.599162] type=1400 audit(1327009247.697:17): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1211 comm="apparmor_parser"
[ 6.599210] init: plymouth-splash main process (1198) terminated with status 1
[ 6.599915] type=1400 audit(1327009247.697:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1211 comm="apparmor_parser"
[ 6.657593] vgaarb: this pci device is not a vga device
[ 6.657617] vgaarb: this pci device is not a vga device
[ 6.657628] vgaarb: this pci device is not a vga device
[ 6.657640] vgaarb: this pci device is not a vga device
[ 6.657651] vgaarb: this pci device is not a vga device
[ 6.657663] vgaarb: this pci device is not a vga device
[ 6.657675] vgaarb: this pci device is not a vga device
[ 6.657686] vgaarb: this pci device is not a vga device
[ 6.657699] vgaarb: this pci device is not a vga device
[ 6.657710] vgaarb: this pci device is not a vga device
[ 6.657721] vgaarb: this pci device is not a vga device
[ 6.657733] vgaarb: this pci device is not a vga device
[ 6.657744] vgaarb: this pci device is not a vga device
[ 6.657756] vgaarb: this pci device is not a vga device
[ 6.657767] vgaarb: this pci device is not a vga device
[ 6.657778] vgaarb: this pci device is not a vga device
[ 6.657789] vgaarb: this pci device is not a vga device
[ 6.657800] vgaarb: this pci device is not a vga device
[ 6.657812] vgaarb: this pci device is not a vga device
[ 6.657823] vgaarb: this pci device is not a vga device
[ 6.657833] vgaarb: this pci device is not a vga device
[ 6.657844] vgaarb: this pci device is not a vga device
[ 6.657856] vgaarb: this pci device is not a vga device
[ 6.657866] vgaarb: this pci device is not a vga device
[ 6.657878] vgaarb: this pci device is not a vga device
[ 6.657888] vgaarb: this pci device is not a vga device
[ 6.657899] vgaarb: this pci device is not a vga device
[ 6.657920] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.657937] vgaarb: this pci device is not a vga device
[ 6.657950] vgaarb: this pci device is not a vga device
[ 6.657962] vgaarb: this pci device is not a vga device
[ 6.657973] vgaarb: this pci device is not a vga device
[ 6.657986] vgaarb: this pci device is not a vga device
[ 6.661945] [fglrx] ATIF platform detected with notification ID: 0xd0
[ 7.496100] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 7.638566] fglrx_pci 0000:00:01.0: irq 53 for MSI/MSI-X
[ 7.639260] [fglrx] Firegl kernel thread PID: 1228
[ 7.639481] [fglrx] Firegl kernel thread PID: 1229
[ 7.639675] [fglrx] Firegl kernel thread PID: 1230
[ 7.639776] [fglrx] IRQ 53 Enabled
[ 7.778666] [fglrx] Gart USWC size:1280 M.
[ 7.778670] [fglrx] Gart cacheable size:508 M.
[ 7.778675] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 7.778677] [fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000
[ 7.778680] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 8.766213] wlan0: authenticate with 00:1a:2a:4a:29:45 (try 1)
[ 8.768988] wlan0: authenticated
[ 8.797953] wlan0: associate with 00:1a:2a:4a:29:45 (try 1)
[ 8.812634] wlan0: RX AssocResp from 00:1a:2a:4a:29:45 (capab=0x431 status=0 aid=2)
[ 8.812639] wlan0: associated
[ 8.814029] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9.877611] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.208169] wlan0: no IPv6 routers present